Sinolift Equipment · Buyer's Guide
The Complete Guide to Stationary Lift Platforms: Types, Applications & Model Selection
Whether you're optimizing a production line, improving warehouse ergonomics, or setting up a loading dock, a stationary lift platform is one of the most versatile and cost-effective pieces of material handling equipment available. This guide covers everything — from the basics and use cases to Sinolift's full product lineup with detailed spec tables.
What Is a Stationary Lift Platform?
A stationary lift platform (also called a stationary lift table or fixed scissor lift table) is a fixed-position, hydraulic-powered lifting device that raises and lowers loads between two height levels using a scissor-arm mechanism. Unlike mobile lift carts that travel with a product through a facility, stationary lift tables are anchored to a single position — typically at a workstation, loading dock, production cell, or logistics interface point.
An electric motor drives a hydraulic pump, which extends the scissor arms to raise the platform. When the operator releases pressure, the platform lowers smoothly under controlled descent. Safety systems — including overload protection, anti-pinch guards around the scissor arms, and an automatic stop when obstacles are detected underneath — are standard on all quality units.
Stationary lift platforms eliminate manual lifting injuries, bridge height differences between conveyor lines and machinery, and enable consistent ergonomic working postures for operators across an entire shift.
Key Application Scenarios
Raises components to ergonomic working height, reduces operator fatigue and injury risk. Can hold a pre-set height consistently across multiple shifts.
Bridges the height gap between dock floor and truck bed. Reduces forklift travel cycles and eliminates manual pallet re-stacking.
Handles dies weighing 2,000–4,000 kg with controlled, precise elevation. Double- and triple-scissor models provide the stability required for heavy tooling.
Pit-mounted tables sit flush with the floor so a standard pallet jack rolls directly onto the lowered platform. Widely used in receiving areas and packaging lines.
Stainless steel platforms, special coatings, and sealed hydraulic systems meet strict hygiene regulations. Remote power units simplify washdown procedures.
Raises machinery or vehicles to a comfortable technician working height. Optional carousel turntable tops provide 360° access without repositioning.
Sinolift Stationary Lift Platform Series
Sinolift (Shanghai Sinolift Machinery Manufacturing Co., Ltd.) is a nationally recognized high-tech enterprise headquartered in Pudong New District, Shanghai. Products are certified to ISO 9001, TUV CE, EN1570, and ANSI/ASME safety standards and exported to more than 50 countries. The stationary lift platform lineup covers nine distinct series engineered for different load, height, and access requirements.
HZ Mini Lift Table — Single & Double Scissor
| Parameter | HZ500 | HZ1001 |
|---|---|---|
| Capacity (kg) | 500 | 1,000 |
| Platform Size (mm) | 916 × 610 | 916 × 610 |
| Base Frame Size (mm) | 700 × 450 | 906 × 585 |
| Lowered Height (mm) | 162 | 180 |
| Raised Height (mm) | 950 | 770 |
| Lift Time (s) | 17–22 | 15–20 |
| Power Pack | 380V/50Hz, 0.75 kW | 380V/50Hz, 1.1 kW |
| Net Weight (kg) | 98 | 115 |
HW Heavy-Duty Standard Electric Lift Table
HW Series — 1,000 kg Models (Representative Selection)
| Model | Platform Size (mm) | Lowered / Raised (mm) | Lift Time (s) | Power Pack | N.W. (kg) |
|---|---|---|---|---|---|
| HW1001 | 820 × 1,300 | 205 / 990 | 20–25 | 380V/50Hz, 1.1 kW | 160 |
| HW1003 | 850 × 1,700 | 240 / 1,300 | 30–35 | 380V/50Hz, 1.1 kW | 200 |
| HW1005 | 850 × 2,000 | 240 / 1,300 | 30–35 | 380V/50Hz, 1.1 kW | 212 |
HW Series — 2,000 kg Models (Representative Selection)
| Model | Platform Size (mm) | Lowered / Raised (mm) | Lift Time (s) | Power Pack | N.W. (kg) |
|---|---|---|---|---|---|
| HW2001 | 850 × 1,300 | 230 / 1,000 | 20–25 | 380V/50Hz, 2.2 kW | 235 |
| HW2003 | 850 × 1,700 | 250 / 1,300 | 25–35 | 380V/50Hz, 2.2 kW | 289 |
| HW2005 | 850 × 2,000 | 250 / 1,300 | 25–35 | 380V/50Hz, 2.2 kW | 300 |
HW Series — 4,000 kg Models (Representative Selection)
| Model | Platform Size (mm) | Lowered / Raised (mm) | Lift Time (s) | Power Pack | N.W. (kg) |
|---|---|---|---|---|---|
| HW4001 | 1,200 × 1,700 | 240 / 1,050 | 30–40 | 380V/50Hz, 2.2 kW | 375 |
| HW4003 | 1,000 × 2,000 | 300 / 1,400 | 45–50 | 380V/50Hz, 2.2 kW | 470 |
| HW4007 | 1,700 × 1,500 | 305 / 1,300 | 35–45 | 380V/50Hz, 2.2 kW | 570 |
HW·D Large Double-Beam Lift Table
| Parameter | HW2000D | HW4000D |
|---|---|---|
| Capacity (kg) | 2,000 | 4,000 |
| Platform Size (mm) | 2,500 × 820 | 2,500 × 850 |
| Base Frame Size (mm) | 2,460 × 640 | 2,450 × 785 |
| Lowered Height (mm) | 205 | 230 |
| Raised Height (mm) | 1,000 | 1,000 |
| Lift Time (s) | 36–46 | 26–36 |
| Power Pack | 380V/50Hz, 1.1 kW | 380V/50Hz, 2.2 kW |
| Net Weight (kg) | 265 | 360 |
HD / HT Double & Triple Scissor Lift Table
| Parameter | HD1000 | HD2000 | HD4000 | HT1000 | HT2000 |
|---|---|---|---|---|---|
| Scissor Stages | Double | Double | Double | Triple | Triple |
| Capacity (kg) | 1,000 | 2,000 | 4,000 | 1,000 | 2,000 |
| Platform Size (mm) | 1,300 × 820 | 1,300 × 850 | 1,700 × 1,200 | 1,700 × 1,000 | 1,700 × 1,000 |
| Base Frame Size (mm) | 1,240 × 640 | 1,220 × 785 | 1,600 × 900 | 1,600 × 1,000 | 1,606 × 1,010 |
| Lowered Height (mm) | 305 | 360 | 400 | 470 | 560 |
| Raised Height (mm) | 1,780 | 1,780 | 2,050 | 3,000 | 3,000 |
| Lift Time (s) | 35–45 | 35–45 | 55–65 | 35–45 | 50–60 |
| Power Pack | 380V/50Hz, 2.2 kW | 380V/50Hz, 2.2 kW | 380V/50Hz, 2.2 kW | 380V/50Hz, 2.2 kW | 380V/50Hz, 2.2 kW |
| Net Weight (kg) | 210 | 295 | 520 | 450 | 750 |
HU U-Shape Low Profile Lift Table
| Parameter | HU600 | HU1000 | HU1500 | HU2000 |
|---|---|---|---|---|
| Capacity (kg) | 600 | 1,000 | 1,500 | 2,000 |
| Platform Size L×W (mm) | 1,450 × 985 | 1,450 × 1,140 | 1,600 × 1,180 | 1,600 × 1,180 |
| Min. Closed Height (mm) | 85 | 85 | 105 | 105 |
| Raised Height (mm) | 860 | 860 | 860 | 860 |
| Lift Time (s) | 25–35 | 25–35 | 30–40 | 30–40 |
| Power Pack | 380V/50Hz, 0.75 kW | 380V/50Hz, 0.75 kW | 380V, 1.5 kW | 380V, 2.2 kW |
| Net Weight (kg) | 207 | 280 | 380 | 415 |
HY Low Profile Lift Table
| Model | Capacity (kg) | Platform Size (mm) | Lowered / Raised (mm) | Lift Time (s) | Power Pack | N.W. (kg) |
|---|---|---|---|---|---|---|
| HY1001 | 1,000 | 1,450 × 1,140 | 85 / 860 | 25 | 380V/50Hz, 0.75 kW | 357 |
| HY1003 | 1,000 | 1,450 × 800 | 85 / 860 | 25 | 380V/50Hz, 0.75 kW | 326 |
| HY1501 | 1,500 | 1,600 × 800 | 105 / 870 | 30 | 380V/50Hz, 1.5 kW | 302 |
| HY1503 | 1,500 | 1,600 × 1,200 | 105 / 870 | 30 | 380V/50Hz, 1.5 kW | 415 |
| HY2001 | 2,000 | 1,600 × 1,200 | 105 / 870 | 35 | 380V/50Hz, 2.2 kW | 419 |
| HY2002 | 2,000 | 1,600 × 1,000 | 105 / 870 | 35 | 380V/50Hz, 2.2 kW | 405 |
HE E-Shape Low Lift Table
| Parameter | HE1000 | HE1500 | HE2000 |
|---|---|---|---|
| Capacity (kg) | 1,000 | 1,500 | 2,000 |
| Platform Size (mm) | 1,450 × 1,140 | 1,600 × 1,180 | 1,600 × 1,180 |
| Min. Closed Height (mm) | 85 | 105 | 105 |
| Raised Height (mm) | 860 | 860 | 860 |
| Lift Time (s) | 25–35 | 30–40 | 30–40 |
| Power Pack | 380V/50Hz, 0.75 kW | 380V/50Hz, 1.5 kW | 380V/50Hz, 2.2 kW |
| Net Weight (kg) | 285 | 390 | 420 |
All Series at a Glance
Use this summary table to quickly narrow down the right Sinolift series before reviewing individual model specs.
| Series | Capacity Range | Min. Lowered Height | Max Raised Height | Platform Entry | Best For |
|---|---|---|---|---|---|
| HZ | 500–1,000 kg | 162 mm | 950 mm | Forklift / hoist | Compact stations, special-size loads |
| HIW | 500–3,000 kg | 190 mm | 1,020 mm | Forklift / pit mount | Standard workstations, dock interfacing |
| HW | 1,000–4,000 kg | 205 mm | 1,400 mm | Forklift / overhead hoist | Heavy-duty manufacturing, die handling |
| HW·D | 2,000–4,000 kg | 205 mm | 1,000 mm | Forklift / overhead hoist | Oversized loads, tandem palletizing |
| HD | 1,000–4,000 kg | 305 mm | 2,050 mm | Forklift / hoist | Elevated conveyor, mezzanine loading |
| HT | 1,000–2,000 kg | 470 mm | 3,000 mm | Forklift / hoist | Multi-level logistics, high-rise integration |
| HU | 600–2,000 kg | 85 mm | 860 mm | Hand pallet jack (U-entry) | No-pit ground-level pallet loading |
| HY | 1,000–2,000 kg | 85 mm | 870 mm | Hand pallet jack / ramp | Warehouse retrofits, ramp-on loading |
| HE | 1,000–2,000 kg | 85 mm | 860 mm | Hand pallet jack (E-entry) | AGV integration, open-bottom skids |
How to Choose the Right Model
To recommend the correct model, suppliers usually need:
- Capacity (kg)
- Platform size (L × W)
- Lift height (min/max)
- Indoor or outdoor use
- Pit mounted or floor mounted
- Power supply (220V / 380V / 415V)
- Special requirements:
- Stainless steel
- Rotating top
- Safety rails
- Explosion-proof system
Why Choose Sinolift?
Sinolift's manufacturing facilities in Pudong New District, Shanghai, operate with laser tube cutting, laser plate cutting, robotic welding, and precision press machinery, ensuring dimensional accuracy and weld quality that translates directly into long service life. Every lift table is manufactured to JB/T 9229.1(2/3)-1999 standards with full traceability through CNAS-accredited quality control processes. The company holds multiple invention patents and has been recognized as a National High-Tech Enterprise — reflecting ongoing R&D investment.
For international buyers, Sinolift's multi-market certifications remove regulatory barriers and simplify import compliance in key export destinations:
Whether you need a single HZ500 for a specialized workstation or a fleet of HW4000 platforms for a new distribution center, Sinolift's breadth of standard models — combined with the ability to customize platform dimensions, power supply configurations, and coatings — makes it a one-stop solution for stationary lift platform requirements at any scale.