CTD1000-M700 Semi-Electric Roll Film Lifter
Engineering review of a supplied roll-handling machine associated with a stated 1.2-tonne, 1-metre configuration.
Engineering Brief
A roll lifter must be checked as a complete load system
The project folder identifies a semi-electric roll film lifter for a stated 1.2-tonne, 1-metre requirement. The three photographs and video show a compact industrial machine with powered lifting, a protective frame and a cylindrical-load support area. In material handling, selection depends on more than nominal capacity: roll mass, diameter, width, centre of gravity, support method, route clearance and floor condition must all be verified.
The referenced CTD1000-M700 standard page lists 1,000 kg capacity, 841 mm maximum plate lift, 500 mm barycentre, 1,000 mm maximum roll diameter, 1,500 mm maximum roll width and 285 kg weight. These are standard-product reference values, not automatic proof of the shipped 1.2-tonne configuration.
Acceptance Logic
Verify the final drawing, load centre and route
Compare the approved drawing with the delivered machine, confirm the project rating and the meaning of the 1-metre dimension, inspect the support and anti-roll functions, then conduct a controlled load test within the approved limit. The route trial should include the narrowest aisle, tightest turn, threshold and final placement point.
FAQ
Questions for engineering review
Is the shipped machine rated for 1.2 tonnes?
The supplied folder states a 1.2-tonne configuration. The referenced standard page lists 1,000 kg. Confirm the final rating from the project drawing and quotation.
What should be included in an inquiry?
Provide roll weight, diameter, width, core details, centre of gravity, required lift height, route dimensions and pickup method.
Can the standard page prove the exact shipped specification?
No. Standard catalogue facts must remain separate from project-specific facts unless the supplied project documents confirm them.
Discuss the roll-handling configuration
Send your roll drawing, mass data, required height and route dimensions to info@sinolift.net. WhatsApp: +86 138 1717 8390.